Find answers in our
Build your franchise
We help you set up your store
Contact with our
User atention center
The best reflective material on the market to prevent detection by thermal cameras. It comes with adhesive strips at the back side for a fast and precise installation.
Dis Swat AUTOFIX reflective sheeting is one of the best ways to keep your grow room hidden from heat detecting cameras. This sheeting is made by KIT, and became popular among growers that are looking to add that extra discretion to their grow rooms in areas where helicopters use thermal cameras to detect indoor crops; your lighting systems heats the walls of your grow room up, which then shows up on the cameras.
This sheeting has layers with air bubbles between each layer that help to keep the temperature down, and thanks to its 100% reflective exterior you'll be making the absolute most of your grow lights. Another clear advantage is the non-flammable material that it's made out of, keeping your grow room safe against accidental electrical fires. It's available in various models that can be chosen using the above menu. The two sided model is necessary if you're using lots of lighting and the temperature in your grow room gets high when your bulbs or ballasts are on. If you have a simple grow room, the one sided model should be enough.
It's around 1cm thick and super easy to install thanks to its AUTOFIX strips that stick to the wall without needing nails or screws that can damage the Dis Swat sheeting and let heat out. If you already have a previous model of Dis Swat sheeting set up and you want to improve your set up by sealing any joints, we now have the UNIONS model which is 15cm wide x 25m, which you can cut to your liking and simply stick on top of the joints to avoid any heat escaping.
You can easily achieve a temperature difference of about 15° when checked using a heat detecting camera.
Dis Swat AUTOFIX Sizes:
Dis Swat AUTOFIX thermal insulating sheeting