Dis Swat Top Quality Thermal Insulating Material

Description

Dis Swat Top Quality Thermal Insulating Material Creates a Layer that Doesn't Heat up 

Insulate your crop from the outside with one of the most effective products on the market: Dis Swat reflective sheeting. It consists of a reflective side and a very thick layer of air-bubbles which generate a chamber that acts as a buffer between your grow room and the walls, so that they don't heat up. Thermal insulation will enable your walls to stay cool and go unnoticed by thermal cameras.

Reflects light to protect plants from excessive heat

The reflective sheeting, on the inside part of the lining, will make light bounce back to your plants and also stops it from heating up the walls. Dis Swat allows us to go a step further and apply extra insulating power. We stock a model that has two reflective sides which also insulates the air chamber from the wall, preventing your grow room from heating up in case heat comes from the outside.

It's almost 1 cm thick and very easy to attach as it can be stapled directly to the wall.

Easy to install, it efficiently isolates grows

Any gap or joint left by the lining will have to be covered with duct tape on both sides, in order to give continuity to the air-chamber and avoid thermal bridges.

It is possible to achieve up to 15°C differences between the temperature outside your grow room and the one inside.

Dis Swat Top Quality Thermal material full roll measures:

•  25 x 1.25 m