Cornwall Humidity Controller

The Cornwall Humidity Controller will keep the correct relative humidity values in a very simple way.

It can be programmed to increase the humidity, using a humidifier connected to the controller, or to decrease the humidity, using a dehumidifier or an extractor.

When the device its off, we must push the ON button while pressing the down arrow until a flame or a drops icon is displayed. The drops mean we have connected a humidifier that will turn on when the humidity decreases.

The flame means we have to use a dehumidifier or an extractor that will turn on when the humidity is too high.

It has a digital screen that will display the room’s humidity and controls the devices connected to it.

Specifications:

• Voltage: 230V AC/50HZ
• Maximum load: 16A 3680W – Resistive Load / 2A 460W – Inductive Load;
• Operational Temperature: 5ºC ~ 40°C.
• Storage Temperature: -10°C ~ 50°C
• Humidity Control Range: 30%-90%.
• Precision: ±5%
• Measuring Interval: 10 sec
• Temperature range: 0°C (32°F) ~40°C (104°F)