Ultrasonic Humidifier (1, 3, 5 or 9 membranes)

Ultrasonic Humidifier 1, 3, 5, 9 or 12 membranes

This ultrasonic humidifier (with 1, 3, 5 or 9 membranes) can help you to increase humidity in your growing area without the need to use heat, which allows you to reduce the heat in your grow tent. An electric current makes a ceramic membrane vibrate which produces mist that contains micro-drops of water that float in the air and increase humidity.

We have various models to choose from, depending on the needs of your growing room. These humidifiers come with one, three and nine membranes in order to cover different areas. You’ll need to choose the one that works best depending on the size of your growing room and its relative humidity.

Small humidifier to maintain stable parameters

Its small size is perfect for pretty much any water tank – the bigger the tank, the less time you’ll need to spend refilling it. You can place it in a bowl, a water tank or a bucket. Also, you’ll need to keep in mind that you shouldn’t use tap water because it tends to have too much calcium which can affect this machine negatively. The best type of water to use is distilled water which avoids issues such as this and increases the service life of your humidifier.

If the membrane breaks for whatever reason, you can simply get a replacement membrane right here on your page. The spare membrane comes with a key with which you can open up the area that contains the membrane and easily replace it.

Add a timer to automatize the process

This ultrasonic humidifier needs a control system such as a timer or a Humidity Controller, which allows you to keep it working perfectly at all times. If you leave it on all the time, it’ll release humidity into the air until its water runs out, which increases humidity far too much in grow rooms. Once the water runs out it’ll automatically turn off.

Keep in mind that it’s incredibly dangerous to work with water when electricity is also involved – make sure that the cables are always running above the lights in your grow tent and your watering systems and other devices that use water should always be on the floor.

This humidifier comes with floaters of all kinds so that the membrane is constantly in contact with water without sinking too much, which would stop it from working properly.

The one-membrane model comes with a replacement membrane and a small sort of “hat” that works as a sort of anti-splashing mechanism; this stops droplets of water from shooting out of your tank. The 3, 5 and 9 membrane models don’t include replacement membranes and there are no available anti-splash hats available for these on the market.

If you have problems installing this humidifier, please don’t hesitate to contact us to help you out. We have a team of advisers willing to answer all of your questions.