Uvonair CD-800 US-1 Corona Ozone Generator

Description

Anti-Odor Uvonair CD-800 US-1 Corona Ozone Generator

The Uvonair CD-800 US-1 Corona ozone generator is a sturdy, durable generator that works using a ceramic corona, which is essentially a sort of plaque that just needs to be cleaned once a year or once after every grow if you want to be thorough; if you don’t clean it, it’ll eventually stop working, so make sure not to forget. You can also use a carbon filter inline before the generator to keep it from getting as dirty.

Remove pungent grow scent with this efficient ozonizer

These generators can get rid of aromas in extraction systems that work at up to 500 m3/h. It produces 1100 mg of ozone per hour, which can in fact reach 1000 m3/h. However, sometimes if you’re growing super potent cannabis it may end up smelling a little towards the end of the flowering period; this can be solved by using a carbon filter like we mentioned before. These devices are 200 mm in diameter, so it’ll fit the same diameter extractor fan or lower, using a reducer.

Seal all tubes and enjoy Uvonair CD-800 US-1 Corona Ozone Generator

Make sure that you’ve connected everything properly, using ducting tape on the joints or a Duct Mounting Clamp if you want to make sure that there are no leaks and that all of the air is being forced through the ozone generator. We recommend using clamps too, if you can. This device consumed 24 w, which is quite low for how efficient it is.

Uvonair CD-800 US-1 Corona Ozone Generator characteristics:

• Consumption: 24 w
• Diameter: 200 mm
• Apt for extractors ranging from 500 m3/h to 1000 m3/h