Lumatek Electronic Ballast Dimmable

Description

Lumatek Electronic Ballast Dimmable

With this Lumatek ballast you can adjust the lighting power without needing to change your light bulb. You can grow your plants using less intense lights which can save money when it comes to your bills; cannabis plants need much less light during the growth stage than during the flowering.

Great results thanks to its great power

As your plants advance, you can progressively increase the power until the fattening period, when you can use the Super Lumen setting, which allows you to get the absolute most out of your plants, supplying a max. power of 660W. These ballasts barely emit any heat, so you can place them inside your grow tent.

Beautiful Design and Efficient Product

Its design makes it very appealing when mounted on a good frame on the wall of your grow room. With a Plug & Play cable (not included), you can connect any reflector without messing with the wiring (never cut the cable, or any warranty will be void).

It automatically detects the bulb, cutting the power if there’s no bulb connected, so no need to worry about short circuits.

It also has an internal fuse which will go before the device burns out. Several models available, all with a dimmer, from 400W to 1000W.

The first model (400W) can be adjusted from 250W to 400W (Super Lumen). The second model (600W), can be adjusted from 400W to 600W (Super Lumen). Finally, the most potent model (1000W) goes from 600W up to 1000W (Super Lumen).

Lumatek Electronic Ballast promotes plants strength

With these devices, you’ll be able to boost the growth of your plants, obtaining larger and more resinous flowers. They have a great protective case and cooling system that also protects the ballast from radio interference.

Technical specifications

• Bulb: MH/HPS
• Output Power: 400W, 600W, 1000W.
• Dimming range: 400W, 600W, 1000W. 10-110%
• Maximum input current: 2,75 A.
• Line Voltage: 240V
• Frequency: 50/60Hz
• Power factor: ≥0,99
• Shot Voltage: ≤1,7KV
• Total Harmonic Distortion: ≤10%
• Room temperature: -10º hasta +65ºC
• Housing Temperature: ≤70ºC
• Dimensions: 310 x 15 x 85 mm
• Weight: 2.5 kg