Mini Rosin Press Electric Graspresso GP1-ERP

Description

Make your rosin easily with the Graspresso GP1-ERP Press

The Mini Rosin Press Electric Graspresso GP1-ERP is an amazing and convenient option to perform rosin extractions. Its usability, ergonomics and automatic operation will delight the average consumer, yet, it is a wonderful alternative for cannabis clubs and CBD distributors (or psychoactive marijuana where this product is legal).

This device is able to exert up to 1 Ton of pressure and has a temperature range from 0ºC to 150ºC (32ºC-302ºC). Depending on the settings of these parameters, the rosin consistency, flavor and effect will vary, obtaining completely different variations and powers.

The cannabis industry Rosin at its peak

Rosin extracts are becoming very popular among consumers as it is easier and safer to obtain compared to other methods such as BHO. Besides, the quality of the obtained concentrate reaches heights never seen before, allowing you to enjoy cannabis in a much potent and flavorful way.

How to use the Mini Rosin Press Electric Graspresso GP1-ERP

1. Set the power plug in the unit and connect it to the mains.
2. Turn on the system by pressing the ON/OFF button (the panel will light up once it’s ready to use).
3. Press the set button (in the middle) to access the temperature display of the UPPER plate.
4. Adjust the desired temperature with the up and down buttons.
5. Press the set button again to access the temperature display of the LOWER plate.
6. Adjust the desired temperature with the 'up' and 'down'.
7. Press the set button again to access the timer.
8. Adjust the desired time by increasing or decreasing the seconds with the up and down buttons.
9. You can set either Celsius or Fahrenheit by pressing the central button again.
10. Lastly, by pressing the set button again, the settings will be saved and the plates will start heating.
11. When the heating symbol is not shown anymore, press the ‘TIMER’ button to start the selected countdown.
12. Place the material between the plates. Press and hold the ‘down’ button to close the machine. To stop the closure, stop pressing the button. To open the plates again, press and hold the ‘up’ button.
13. Remove carefully the material wearing heat resistant gloves or any similar tool.

How to clean the Mini Rosin Press Electric Graspresso GP1-ERP

• Clean the machine only when the plates have completely cooled down.
• Dampen a cloth with isopropyl alcohol and clean all the components.
• Do not immerse in water.

Graspresso GP1-ERP warnings, cautions and recommendations

• Do not touch the heating plates nor insert your fingers in the space between (high risk of burns and crushing).
• Do not use baking paper or plastic sheets. Use only the proper and approved sheets able to handle pressure and heat.
• Keep out of dust and dirt.
• Turn off the press when not in use or to manipulate the unit (cleaning, repairs, maintenance…).
• First connect the cable to the press and then to the mains.
• Always keep out of the reach of children.
• Keep away from the water or any heating sources.

Mini Rosin Press Electric Graspresso GP1-ERP characteristics

• Material: steel.
• Pressure: up to 1 Ton.
• Using method: Electric.
• Potential: 220v.
• Temperature range: 0ºC - 150ºC (32ºF-302ºF).
• Weight: 6.8 kg (15 lbs).
• Size: 33 x 22.5 x 23 cm (13 x 8.8 x 9 in).
• Plates size: 6 x 9 cm (2.3 x 3.5 in).

Box contents

• Graveda Mini Rosin Press Electric Graspresso GP1-ERP.
• Power cord.
• User’s manual.