Trimpro Bucker Bud Remover

Trimpro Bucker Flower Removal, the Best for your Harvest

Trimpro Bucker, designed by the amazing Trimpro, is a machine designed for preparing your cannabis flowers before actually trimming them or using a Trimpro Rotor XL. It’s made out of an aluminum structure, stainless steel blades and rubber for the stand. It weighs 40 kg, and 54 kg when in a stand. Thanks to this amazing device, it’ll take you no time at all to prepare your cannabis flowers for trimming; your flowers will be safe in this machine & will have all stems removed.

How to use the Trimpro Bucker

The Trimpro Bucker needs to be plugged in first. You can adjust the speed, although we recommend using between 60 and 80 (which is clear on the speed indicator) although the speed setting can be adjusted in 10 s from 0 to 100. In order to use this machine properly, you need to stand in front of the machine and place the branches in straight so that the Bucker can suck them in properly. It has five different openings, all of which have different diameters; 3.18 mm, 4.76 mm, 6.35 mm, 7.94 mm and 9.53 mm. The buds fall down the bottom, we recommend using a clean container to catch them.

Maintaining and Cleaning the Trimpro Bucker Bud Remover

There are two ways to clean these machines; the first, faster way involves unplugging and cleaning the cutting blade which is made out of stainless steel. You can clean it with some cloth and isopropyl alcohol. If you want to do a deep clean you’ll need to remove the front Plexiglas panel, the ramp, the stainless steel plate and the back screen. This will allow you to get to all of the smaller parts in the machine, cleaning them thoroughly. You don’t need to grease any of the joints, everything is sealed.

Warning:

You need to be extremely cautious when using the Trimpro Bucker; it’s an incredibly strong machine, so we recommend using protective gloves and not putting your hands anywhere near the cannabis branch inlets.

Trimpro Bucker Details:

• Trimpro Bucker with Box: 55 x 46 x 50 cm
• Table stand packaging: 103 x 78 x 20 cm
• Separator: 56 x 56 x 51 cm
• Small blade: 3.18 mm, 4.76 mm, 3.65 mm, 7.94 mm, and 9.53 mm holes.
• Large blade: 7.94 mm, 9.53 mm, 11.11 mm, 12.70 mm, 15.88 mm and 19.05 mm holes.
• Weight: 40 kilo
• Voltage: 220v
• Materials: Aluminum structure, stainless steel blades and rubber stand

Trimpro Bucker contents:

• Bucker + table
• Large Blade
• Roller Brackets

Product available upon request.