Find answers in our
Build your franchise
We help you set up your store
Contact with our
User atention center
Nutradip GrowBoss is an EC and pH monitor that allows you to keep a close eye on your water at all times. It doesn’t need batteries as it can be plugged into the mains in order to keep it on continuously.
It has two sensors with which it measures three of the most important parameters when it comes to plant feeding. By controlling the pH in your water you’ll be able to guarantee correct nutrient absorption – depending on the phase your plants are in you’ll need to have a certain pH.
EC is measured to figure out if the water you’re using has too many salts/minerals. If it does, you’ll need to add more distilled water in order to reduce conductivity. This parameter also changes depending on the phase that you’re plants are in. During the growth period it should be between 0.8-1, whereas when flowering your plants need around 1.8-2 EC unless you’re using a CO2 system, which requires different temperatures and EC levels. (You can check out our CO2 post on our blog to find out more).
You’ll also be able to check on your water temperature, which should be between 18 and 20°C when growing in hydroponics, and between 20-22°C when growing in normal substrates.
The sensors have a 6-month guarantee, and the screen itself has a 2 year guarantee. The pH sensor needs to be calibrated to pH7 and pH4 before using, and the EC needs to be calibrated to 1413.
EC/ppm specifications :
Nutradip GrowBoss Controller