Choose a searcher
  • Monitor Trimeter - Medidor de Ec, Ph y Temperatura del Agua.
  • Monitor Trimeter - Medidor de Ec, Ph y Temperatura del Agua.
  • Monitor Trimeter - Medidor de Ec, Ph y Temperatura del Agua.
  • Monitor Trimeter - Medidor de Ec, Ph y Temperatura del Agua.
  • Monitor Trimeter - Medidor de Ec, Ph y Temperatura del Agua.
  • Monitor Trimeter - Medidor de Ec, Ph y Temperatura del Agua.
  • Monitor Trimeter - Medidor de Ec, Ph y Temperatura del Agua.
  • Monitor Trimeter - Medidor de Ec, Ph y Temperatura del Agua.
  • Monitor Trimeter - Medidor de Ec, Ph y Temperatura del Agua.
  • Monitor Trimeter - Medidor de Ec, Ph y Temperatura del Agua.

Nutradip GrowBoss Controller

€360.00
1 Review(s)  
Tax included

Measure the temperature, acidity and amount of salts in your nutrient solution with Nutradip GrowBoss, used to measure pH, EC and temperature in water.

Quantity

By buying this product you can collect up to 36 loyalty points. Your cart will total 36 loyaltypointsrsi that can be converted into a voucher of € 7.20.


Más de 40  España, Chile & Colombia 100% safe payment, protected data
Regalo en todos  tus pedidos Discreet Shipping 24 h
Envío gratuito en superiores a 30 € Do you need help? 0034 962066298

Nutradip GrowBoss is an EC and pH monitor that allows you to keep a close eye on your water at all times. It doesn’t need batteries as it can be plugged into the mains in order to keep it on continuously.

It has two sensors with which it measures three of the most important parameters when it comes to plant feeding. By controlling the pH in your water you’ll be able to guarantee correct nutrient absorption – depending on the phase your plants are in you’ll need to have a certain pH.

EC is measured to figure out if the water you’re using has too many salts/minerals. If it does, you’ll need to add more distilled water in order to reduce conductivity. This parameter also changes depending on the phase that you’re plants are in. During the growth period it should be between 0.8-1, whereas when flowering your plants need around 1.8-2 EC unless you’re using a CO2 system, which requires different temperatures and EC levels. (You can check out our CO2 post on our blog to find out more).

You’ll also be able to check on your water temperature, which should be between 18 and 20°C when growing in hydroponics, and between 20-22°C when growing in normal substrates.

The sensors have a 6-month guarantee, and the screen itself has a 2 year guarantee. The pH sensor needs to be calibrated to pH7 and pH4 before using, and the EC needs to be calibrated to 1413.

pH-meter specifications:

  • Range: 0,0 - 14,0 pH
  • Precision: ± 0,01%
  • Resolution: 0,1 pH
  • Calibration: 2 points, manually.
  • Operating range: -20ºC to 80ºC // -4º to 176ºF 

EC/ppm specifications :

  • Range: 0 - 9990ppm (202/203)
  • Precision: ± 2%
  • Resolution: 1 ppm
  • Calibration: 1 point manually.
  • Operating range: -20ºC to 80ºC // -4º to 176ºF 

 Temperature specifications:

  • Range: 5 - 32ºC / 40 - 90ºF
  • Precision: ± 1ºC / ± 1ºF
  • Resolution: 1ºC / 1ºF
  • Calibration: 1 point manually
  • Operating range: -20ºC to 80ºC // -4º to 176ºF 

You might also like

Nutradip GrowBoss Controller Reviews

jose
05/29/2014

muy bueno

ya ha llegado a casa y prontissimo,buen servicio asi ganareis muchos clientes gracias

Write your review

Write your review