Find answers in our
Build your franchise
We help you set up your store
Contact with our
User atention center
This ozone injection system will let you get rid of the smells coming from a large grow room. It can eliminate the odors coming from a 6,000m3/h extraction system, which is what's necessary for a crop of about 60m2. To give you an idea, it is the necessary air flow to ventilate a room with 40 600w lamps.
Ozone gas oxidizes the molecule surface. By oxidizing odor particles, these ones lose their properties and cannot release any aroma. It is a very simple system. You must place the injection equipment after all electrical devices because if the ozone gas goes through any of our electrical devices, they will certainly last a short time due to the fast oxidization of their components.
Its very simple to install. You just have to drill a hole in the extraction duct, about 5m before the air goes out and reaches the street. This length will be more than enough for all the air to mix with ozone. Place the small silicone tube inside the extraction duct, pointing towards the outlet, so that the ozone that comes out of the injection equipment goes in the same direction as the air flow.
Place the ozone generator wherever it suits you best and seal the hole you made to place the small tube well. In this way, odors will not escape. Now, all you have to do is plugging your generator into a socket and start using it.
Powers of ozone canyons: