Find answers in our
Build your franchise
We help you set up your store
Contact with our
User atention center
If you want to make sure that no odors are leaking from your grow room you’re best off getting one of these devices. This particular ozone generator is capable of working with airflows of up to 3000m3/h. It’s 300mm in diameter, so it’s perfect for extractors that are 315mm, which is usually the size used for such large extraction systems.
Ozone gas essentially gets rid of odors by corroding odor particles and destroying them – however, it unfortunately does the same thing to electrical devices and metallic circuits, so you’ll need to make sure that it’s set up at the very end of your extraction circuit – the ozone should NEVER come into contact with your lighting equipment or your plants.
Make sure to leave about 5 meters of ducting after the generator so that there’s enough time for the air to mix in with the ozone and become odorless. If you don’t leave enough space, it may still smell a bit once it gets out. We also recommend using a carbon filter to make sure the generator doesn’t get too dirty (you’ll need to clean it every now and then) and also for maximum efficiency.
These devices use around 90w, which isn’t that much considering the amazing job that it does. This ozone generator does not use bulbs, so you don’t have to replace anything; simply clean the coronas once a year to make sure they don’t build up dirt. Plus, if you have a carbon filter it’ll get a loss let dirty.
This product is ordered upon request; delivery may take up to 24/48h longer.