Find answers in our
Build your franchise
We help you set up your store
Contact with our
User atention center
This Class 2 Argolite lighting kit has everything you need to set up your indoor lights, offering a more efficient light than with classic magnetic ballasts, reducing light-blinking and energy loss.
The Class 2 Argolite lighting kit is an affordable and efficient lighting kit, including a ballast, reflector and bulb so that you can simply set it up as soon as you get it.
This Class 2 Argolite kit contains a 600w magnetic ballast which is more efficient than classic ballasts – it comes with a flame-retardant case, which offer extra safety against possible indoor grow fires. It comes with the cable to plug it in and a cable to connect it to the reflector, so you shouldn’t need to buy any extra material or DIY it, which can be dangerous and can cause your warranty on the ballast to become void.
This ballast has been put through many tests in order to test how well it does with humidity, changes in the current and fires – it passed every test with flying colors.
First, humidity resistance was tested; it was placed in a room with 93% relative humidity for two entire days and came out working just as perfectly as it did when it went in.
In order to test the current, it was put through extremely high voltages in order to attempt to overheat it, however it didn’t even blink – this ballast is perfect for large grows.
The most incredible test done, however, was the fire test. This ballast has a fireproof casing, which was put under temperatures of up to 650ºC – once the gas was turned off, flames dissipated within 30 seconds and didn’t catch on. This means that if it begins to melt and drips on flammable material, it won’t ignite thanks to the fact that it simply can’t catch fire. The outside material of the ballast stops any flames from getting to the interior – a flaming hot piece of metal was placed on top of the ballast and it only managed to burn 2mm into the ballasts case itself.
You can place the ballast simply on the ground or vertically hanging on the wall, as it comes with a hook at you can use to attach it to the wall, so it’s much easier to keep out of the way. We recommend hanging it outside your grow area in order to avoid any extra heat let off by the device, allowing your plants to grow healthier and more productive.
It includes a classic hammertone reflector that you should only have to attach to the cables from the ballast and screw in the bulb after. If you want to make the most out of this system, you just have to get some pulleys so that you can raise or lower the reflector, keeping it at the right height.
The included bulb is an Agrolite SHP Mixed 600w light that you can use during your plants’ entire cycle, offering large results both during the growth period and flowering period.
Class 2 600w Argolite Lighting Kit