Find answers in our
Build your franchise
We help you set up your store
Contact with our
User atention center
The 600w Xtrasun Kit for indoor growing comes with everything you need to light up your indoor growing system, including a magnetic ballast, a hammertone reflector and a bulb to choose from – either for flowering or a mixed spectrum bulb.
This is one of the easiest lighting kits to set up. The 600w lighting kit is a kit used to grow cannabis indoors. It contains a full magnetic ballast with cables and Plug & Play jacks in order to set it up with relative ease.
You can cover an area up to 1.2 square meters, producing up to 1g per watt used once it’s been done right – make sure to change your bulb after every three growing cycles.
Over time, light bulbs lose their strength even though ballasts keep using the same electricity. Due to having old bulbs but a normal functioning ballast, your plants will receive much less light but you’ll still be using the same amount of electricity.
In order to clean the reflector, simply use a cloth that has been dampened with water – never use cleaning products, as they may damage the surface of the reflector, which can’t be fixed.
To connect it, simply attach the Plug & Play cable to the reflector, making sure to place the blue and brown cables on each edge. Once the cables are positioned, all you have to do is connect the ballast to the reflector using the Plug & Play cable.
Before plugging it into the mains, screw the bulb in but make sure not to touch it with your hands. If you do accidentally touch the glass, clean it with a dry towel – if you leave any skin grease behind, the bulb may end up breaking.
These lights need to be controlled by a timer in order to control the amount of light your plants are getting during the growth and flowering periods.
Xtrasun 600w Lighting Kit