Find answers in our
Build your franchise
We help you set up your store
Contact with our
User atention center
The Wakan vaporizer by Kalumet is a portable vaporizer with a bubble-shaped glass atomizer. It has a bowl inside for you to place your extracts and oils; you can also use it to vape dried herbs if you use a T2 atomizer (not included).
Open the box up and remove the cover from the bottom of the main part, which is where you’ll need to place the battery. Place the lid back on and screw it in tightly. Carefully screw the bubble atomizer into the battery. Once the whole vaporizer is put together, it measures about 18.2cm and sits comfortably in your hands.
Just above the silver buttons, you’ll notice a little rubber flap. That’s where the charger goes. You should charge it for 12 hours before using it for the first time to ensure that the battery works properly and to extend its lifespan. You can charge it in your computer or laptop, or using a standard USB to plug adaptor.
Now that you have your Wakan vaporizer charged and ready to go, it’s time to learn how to use it. In order to turn it on, all you have to do is press the OK button five times in a row. The LED screen will come on and show you how the battery is doing. It also counts the amount of drags taken and the amount left depending on the amount of battery. You can reset the drags taken by removing the battery and putting it back in.
You can adjust how fast the coil heats up by using the +/- buttons, from 3 to 6v. The best way to vape an extract is to use the highest possible strength, however if you want to vape dry herbs you’ll need to use less power.
To refill this device, simply remove the bubble atomizer with care and then use a dabber to fill the bowl inside with a small amount of oil or BHO. Place the atomizer back on the battery and you’re ready to start vaping. Press the OK button and the bowl will begin to heat up – now you can begin to inhale the vapor.
Kalumet Wakan BHO Vaporizer contents: