GSE Temperature and Hysteresis Controller

GSE Temperature Controller with Hysteresis

Now, you shouldn't have any issues with noise from your extractor thanks to this GSE controller that can limit the maximum and minimum speeds and temperature hysteresis (regulated in degrees).

GSE is a reliable temperature controller

If set to 24ºC, for instance, and the hysteresis is set to 2ºC, the temperature will rise to 26ºC and then the extractor will turn on to lower the temperature back to 24ºC again.A reliable and long-lasting controller; only by GSE. It works through a sensor and through connecting the extractors to the controller. It’s that simple. Compatible with the VK Tubular Extractor.

GSE Controller measures and specifications:

• Case: 130 x 80 x 70 mm
• Controlador: 160 x 100 x 90 mm
• Made for: 1 x 200 W
• Voltage: 230 V / 50HZ
• Digital sensor. 5V, measures temperature from -55ºC to +125ºC (-67ºF to +257ºC) with a precision of 0.5ºC from -10ºC to+58ºC
• Humidity precision: ±4.5% relative humidity
• Protection class: IP54