>> BHO - extractions>>Roller Extractor BHO, steel tube for extractions
Roller Extractor BHO, steel tube for extractions

Roller Extractor BHO, steel tube for extractions

63,00 €

Roller Extractor BHO, steel tube for extractions

Roller Extractor BHO is a tool that allows us to make our own high-quality extractions, using pressurised gas in the process.

63,00 €

Comprar ahora Add to cart


shipping free growbarato

Average assessment

By buying this product you can collect up to 7 loyalty points. Your cart will total 7 points that can be converted into a voucher of 1,40 €.

Product description

With Roller Extractor and some gas containers, you’ll transforms leaves you would have thrown away into BHO. One of the best extraction of cannabinoids you can make but you must purge the result to remove all gas remains. If you’re not sure whether it’s has been properly purged, don’t smoke or pass it through a vacuum pump. The gas is dangerous and toxic.

The use to use the Roller Extractor starts attaching the lower cap (the one with the mesh) and place a paper filter in it then you must top up the Roller Extractor with your weed (if ground, it yield more oil, it not ground, it would be of a better quality), pressing with a stick, not as much as if it were powder but enough not to let air bubbles form between the leaves because we would waste more gas. Once full, we place the nozzle receiver (the top cap) and put in in the fridge for 24h.

After that time, the tube with the weed will be ready for the extraction. Place a Pyrex tray on a flat surface and spray one or two gas cans in the Roller Extractor, depending on its size. When you start spraying the gas in, you’ll see how if drips from the lower cap, dragging the cannabinoids out. And the essence will be captured on our trays.

You can heat it with a hot plate with which you’ll perfectly control the temperature, so you won’t ruins the cannabinoids. It can be done with a water bath, but since we don’t really control the temperature, it could turn into budder, that is, it won’t crystallize but remain tender.

When it doesn’t bubble any more it means there’s barely no gas left, and we’ll have to scrape if off the tray with alcohol-cleaned razors, which should be placed in the fridge for a couple of minutes to remove the protective oil. And we will have our extraction ready.

Some people smoke it like that, but we recommend an extra step, placing it in a vacuum pump for 24h. You’ll see how the extraction improves, acquiring a more solid texture which will facilitate its use and you’ll be sure it’s safer to smoke because it will contain no gas.

After each extraction, clean your Roller Extractor and the other tools with alcohol to have them ready for the next use.

Available in 3 lengths:

  • M - 15cm
  • L - 20cm
  • XL - 30cm

Customers who bought this product also bought:

Videos

Comments

Leave an opinion by pressing here
Assessment 
fran
30/06/2015

roller

ya me a llegado a casa muchas gracias.

    Write your review

    Roller Extractor BHO, steel tube for extractions

    Roller Extractor BHO, steel tube for extractions

    Roller Extractor BHO is a tool that allows us to make our own high-quality extractions, using pressurised gas in the process.

    Write your review