Find answers in our
Build your franchise
We help you set up your store
Contact with our
User atention center
The Solux Eelectra is an adjustable electronic digital ballast which you can use to adjust your light strength from 50 to 110% in boosts of 20w at a time, increasing light absorption up to 30%.
With this digital Solux ballast you can adjust the strength and amount of light that your plants get from 250w to 600w, which is 100%. There is also a boost function that allows you to increase this to around 60w. Thanks to having such a wide range of watts you can increase the intensity of your lights little by little as they grow; this avoids a lot of the stress that is generally involved with growing cannabis, and it also allows you to save on your electricity bill.
It has its own internal timer, so you shouldn’t need to buy a separate timer in order to turn your lights on and off. This avoids a lot of general issues when growing cannabis; if your timer were to become damaged, your plants might end up getting more or less light than they need without you even knowing, ruining them completely.
Your plants will get used to the strength of your lights, they’ll stretch out much less and they shouldn’t get as stressed as they usually would. You can also get a remote control so that you can adjust all of the settings without needing to go all the way over to the ballast.
Solux ballasts hardly let off any heat, so you can set them up inside your grow tent without any heat issues.
Unlike magnetic ballasts, this ballast makes the absolute most of the light from your bulbs; magnetic ballast cause rapid flickering in the lights which can’t be seen with the naked eye, but electronic ballasts get rid of this flickering which increases light absorption up to 30%.
It comes with a Plug & Play cable which is used to connect the ballast to your reflector – make sure to never cut any cables that come with the ballast or you’ll lose your warranty.
With their “soft start” technology, you can give your plants the perfect environment; it turns on very slowly, imitating the sunrise and your plants’ natural environment as much as possible. It takes around 20 minutes to fully turn on.
The adjustable digital Solux electronic ballast hardly generates any noise at all, increasing discretion; the more electronics you have in your grow room, the bigger the risk of someone figuring out what you’re doing.
Its compact, light design allows you to carry it from one room to another without struggling at all.